Dryflow® Tri-Tap Water Sensor Tap
Available
Dryflow® Tri-Tap Water Sensor Tap - Polished Chrome is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Summary
Summary
- Operation: Battery or Mains supply (4 X 1.5 AA batteries or 220-240V power adapter included)
- Flow rate at 3 bar: 5.7 lpm
- Guarantee: 2 years
- Type of water mixing: Cold or premixed via Thermostatic Mixer
- Connector: 1/2"
- Mounting: Deck mounted - hole Ø 25-30mm
- Minimum/Maximum flow pressure: 0.5bar / 8bar
- Supplied with aerator/flow control
- Dimensions: Ø60mm x D230mm (208mm spout projection)
- WRAS Approved
- Part of the Dryflow Tri-Tap series (soap, water and hand dryer all over the sink)
.jpg)
Description
Description
This product can be used as a stand-alone item but also forms part of the Dryflow Tri-Tap series IFSUCM093A-ANON which includes an over the sink hand dryer and automatic soap dispenser. The full set can be purchased in one go by clicking here.
When combined with the Dryflow Tri-Tap hand dryer and automatic soap dispenser, every part of the hand washing experience can be made effortlessly over the sink.
There’s also a 2-product series available in this range as a deck mounted option.
The elegant Dryflow Tri-Tap Water Sensor Tap is WRAS approved and provides a low flow rate of 5.7lpm which is enhanced by the inclusion of an aerator and flow control.
This chrome finished, high quality brass tap can provide both cold or premixed warm water.
It is suitable for a range of differing washrooms as it can withstand water pressures between 0.5 and 8bar.
A high-quality, robust product that we would recommend for mid to high traffic areas (300-500 uses per day).
The unit comes equipped with the ability to choose the power supply with it using either battery operation or via the mains.
The sensor operation allows everything to be touch free, preventing cross contamination and a much more efficient use of water.
The Water Supply (Water Fittings) Regulations or Scottish Byelaws require that a water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be ‘of an appropriate quality and standard. This product demonstrates this by being WRAS approved.
Technical Description
Dryflow Tri-Tap Water Sensor Tap is a WRAS approved, wall mounted, infra-red brass tap with polished chrome finish. Battery operated using 4 X 1.5 AA batteries or mains supplied using the included 220-240V power adapter. Recommended minimum cold or premixed warm water pressure is 0.5 - 8 bar. A 3 bar pressure gives a flow rate of 5.7lpm. A connector size of 1/2” is required. The full Dryflow Tri-Tap series includes a wall mounted hand dryer, water sensor tap and automatic soap dispenser for a complete over the sink wash and dry experience.
Dryflow® Tri-Tap Water Sensor Tap
