AQUAZONE SAVOIA Mono Sensor Tap

A WRAS approved Infra-red basin tap from the AQUAZONE SAVOIA range, this provides all the fundamentals you require in a sensor tap including a low flow rate for maximising water savings.

It comes with a power adapter and a battery component, so that you have the flexibility to choose which method of power supply you prefer or require depending upon the location.

This tough and durable, vandal resistant product allows a supply of cold or premixed warm water from a stylish chromed finished, high quality brass faucet.

The Water Supply (Water Fittings) Regulations or Scottish Byelaws require that a water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be ‘of an appropriate quality and standard. This product demonstrates this by being WRAS approved.

It’s suitable for a host of locations due to the flexibility of a minimum and maximum water pressure range between 0.2bar and 5bar, however for peak performance it’s recommended water pressure minimum is no less than 1 bar.

The box includes a flexible hose for installation purposes.

Technical Description

AQUAZONE SAVOIA Mono AQE-SAV-I301-CP is a WRAS approved Infra-red brass basin tap with polished chrome finish. Deck mounted using a drill hole diameter of 30-32mm. The spout has a 150.00 mm projection. Battery operated using 4 X 1.5 AA batteries *not included* or mains supplied using the included 220-240V power adapter. Recommended minimum cold or premixed warm water pressure is 1 bar (0.2 – 5 bar range). A 3 bar pressure gives a flow rate of 5.2lpm. A connector size of 1/2” is required.

Spec Sheet / Catalogue Page - Aquazone AQE-SAV-I301-CP SAVOIA Mono Sensor Tap - BATTERY or MAINS Supplied (PDF)
Line Diagram - Aquazone AQE-SAV-I301-CP SAVOIA Mono Sensor Tap - BATTERY or MAINS Supplied (JPEG)
2D CAD - Aquazone AQE-SAV-I301-CP SAVOIA Mono Sensor Tap - BATTERY or MAINS Supplied (DWG)
3D CAD - Aquazone AQE-SAV-I301-CP SAVOIA Mono Sensor Tap - BATTERY or MAINS Supplied (DWG)