AQUAZONE AQUAECO High Mono Sensor Tap

The contemporary styled AQUAZONE AQUAECO High Mono Sensor Tap comes fully WRAS approved. This no touch washroom essential utilises a very low flow rate which maximises water saving whilst not affecting performance.

The environmentally friendly flow rate is enhanced by an aerator and flow reducer.

Installers are free to choose the type of power supply which would suit the location as both a battery pack and power adapter are supplied as standard.

Cold or premixed warm water can be is provided through this high-quality brass tap.

Its chrome finish will look great in the most elegant of washrooms.

Being WRAS approved it demonstrates compliance with the Water Supply (Water Fittings) Regulations or Scottish Byelaws which require that a water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be ‘of an appropriate quality and standard.

It’s suitable for a host of locations due to the flexibility of a minimum and maximum water pressure range between 0.2bar and 5bar, however for peak performance it’s recommended water pressure minimum is no less than 1 bar.

Technical Description

AQUAZONE AQUAECO High Mono AQE-ECO-I302-CP is a WRAS approved Infra-red brass basin tap with polished chrome finish. Deck mounted using a drill hole diameter of 30-32mm. The spout has a 127.00 mm projection. Battery operated using 4 X 1.5 AA batteries *not included* or mains supplied using the included 220-240V power adapter. Recommended minimum cold or premixed warm water pressure is 1 bar (0.2 – 5 bar range). A 3 bar pressure gives a flow rate of 3.7lpm. A connector size of 1/2” is required.

Spec Sheet / Catalogue Page - Aquazone AQE-ECO-I302-CP AQUAECO High Mono Sensor Tap - BATTERY or MAINS Supplied (PDF)
CAD - Aquazone AQE-ECO-I302-CP AQUAECO High Mono Sensor Tap - BATTERY or MAINS Supplied (DWG)
Line Diagram - Aquazone AQE-ECO-I302-CP AQUAECO High Mono Sensor Tap - BATTERY or MAINS Supplied (JPEG)