Aquapoint 3 Underbasin Unvented Water Heater 5L, 10L or 15L (AP3/05, AP3/10, AP3/15)

This unvented water heater range comes in a variety of capacities. Suitable for single or multiple outlets, Aquapoint 3 is glass-lined and features external temperature control and frost protection.

• Capacity: Commercial & Residential
• Energy Class: A
• Re-Heat Time: 11mins (5L), 20mins (10L) or 29mins (15L)

Specifications

• Water Pressure: Min 0.1 bar - Max 5.5 bar
• Water Connection: 1/2" BSP
• Wholesome Water Supply: Yes
• Power Rating / Supply: 2kW 230v 50/60 Hz; 8.7 amps
• Dimensions 5L: W256mm x D260mm x H376mm
• Dimensions 10L: W350mm x D265mm x H480mm
• Dimensions 15L: W350mm x D310mm x H480mm
• Product Approvals: WRAS, CE, UKCA
• Warranty: 1 year, on site parts & labour
• IP Rating: IP24
• Filled Product Weight: 13.5kg (5L), 18.5kg (10L) or 24.7kg (15L)

Glass lined steel inner container
Tested to 13 bar

Sacrificial anode
For protection against corrosion

Approvals
WRAS approval and CE endorsed

Insulation
High performance foam

External temperature control
Can be replaced without draining

The Zip Aquapoint III must be installed in accordance with the installation instructions and all current legislation, codes of practice and regulations governing the installation of unvented hot water cylinders in force at the time of installation. The appliance must be permanently connected to the supply through an isolating switch with a contact separation of at least 3mm in all poles and be protected by a suitably rated RCD to protect the appliance, an MCB (miniature circuit breaker) or fuse must be fitted with a rating suitable for the nominal current of the appliance.

The minimum water pressure will vary if a limescale filter is installed.

Spec Sheet - AP3/05
Spec Sheet - AP3/10
Spec Sheet - AP3/15
Install and User Manual - AP3/05, AP3/10 & AP3/15