DB150 / DB175 Series Dolphin Chrome Plated Brass Infrared Tap With Temperature Adjustment

• Operation: Plug In 9 Volt Transformers or 9 Volt Battery (With Low Battery Warning)
• Flow Rate: 3.5 Litres per Minute
• Connector: 3/8" BSP Water Supply Connector
• Mounting: Deck Mounted
• Dimensions: 172 H , 50 D , 135 P (mm)
• Touch Free
• Materials: Quality Chrome Plated Brass
• Minimum/Maximum Flow Pressure: 0bar/8bar
• Type of Water Mixing: Hot and Cold Supply with Temperature Adjustment Lever.
• Hygiene Flush

The touch Free system of the Dolphin DB150/DB175 Series tap will allow water to flow when hands are detected by the infrared sensor, so water waste significantly decreases in high traffic locations. This infrared sensor tap by Dolphin has an elegant and unique design, ideal for high finish locations. The tap comes with temperature control and can be adjusted to the desired temperature by the user. The tap is limited to 70°C. DB150C / DB150S-2 will operate using a 9 volt battery that will provide a warning when power is low. DB175C /DB175S-2 will operate using a plug in 9 volt transformer. For any more specific specifications/requirements, please refer to the Spec Sheet and/or Install and User Manual.

Hygiene flush feature runs the tap for 25 seconds, 24 hours after the last use of the tap. This flush time or 24 hours interval cannot be changed and is not based on real time, the feature can only be switched on or off using a compatible remote control (DB51). Taps are supplied with this feature switched on.

Dimensions: 172 Height , 50 Diameter , 135 Projection (mm)

Certificate - WRAS - DB150 DB175(PDF)
Install and User Manual - DB150 DB175(PDF)
Spec Sheet - DB150 DB175(PDF)